A review: algorithm used for beam forming systems

  • Authors

    • Soma Pal
    • Azazul Haque
    2017-12-28
    https://doi.org/10.14419/ijet.v7i1.2.8991
  • DOA, Beam forming, LMS and Weight calculation.

  • Abstract

    Wireless communication uses a smart antenna to provide better coverage and capacity for the communication system. Main functions performed by the smart antenna are Direction of Arrival estimation (DOA) and beamforming (DBF). The beam forming is signal processing techniques which combine antenna array technology with high-performance up/down-conversion, analog to digital conversion and digital signal processing to provide receivers with very high spatial selectivity. This paper evaluates non-blind algorithm such as LMS, to compute the weight calculation for phased array antenna using Matlab Simulink.

  • References

    1. [1] Mohammad Salman Baig, B. Ramaswam Karthikeyan, “Improved Receiver Architecture for Digital Beamforming Systems†International Conference on Computer, Communication and Electrical Technology, 2011.

      [2] Miss Nayan B. Shambharkar, Prof. Prakash M. Mainkar, Dr. G. N. Mulay, “Implementation of RLS Beamforming Algorithm for Smart Antenna System†International Journal of Engineering and Management Research - April 2014, Volume-4, Issue-2.

      [3] Revati Joshi, Ashwini Kumar Dhande, “Adaptive Beamforming Using Lms Algorithm†International Journal of Research in Engineering and Technology. 2014. ISSN: 2319-1163.

      [4] P. Kabilan, K Meena Alias Jeyanthi, “Performance Comparison of A Modified LMS Algorithm In Digital Beam Forming For High Speed Networks†ICCIMA, 2007.

      [5] Jalal Abdulsayed Srar, Kah-Seng Chung and Ali Mansour, “Adaptive Array Beamforming using a Combined LMS-LMS Algorithmâ€, Aerospace Conference, IEEE, 2010.

      [6] Vijendra Mishral, Gaurav Chaitanya, “Analysis of LMS, RLS and SMI Algorithm on the Basis of Physical Parameters for Smart Antenna, IEEE.

      [7] Constantine A.Balanis, 'Antenna Theory Analysis and Design,' 3/e 2005.

  • Downloads

  • How to Cite

    Pal, S., & Haque, A. (2017). A review: algorithm used for beam forming systems. International Journal of Engineering & Technology, 7(1.2), 58-60. https://doi.org/10.14419/ijet.v7i1.2.8991

    Received date: 2017-12-30

    Accepted date: 2017-12-30

    Published date: 2017-12-28