Design and analysis of energy harvester using MEMS based Cantilever with variable perforations

  • Authors

    • G.R.K Prasad
    • N. Siddaiah
    • P. Sanjeev
    • A. Raviteja
    • P. Karunya
    • P.S. Priyanka
    2017-12-31
    https://doi.org/10.14419/ijet.v7i1.5.9136

  • Abstract

    This paper represents the design and analysis of energy harvester using MEMS based cantilever with PMN-PT single crystal properties which has excellent piezoelectric properties while compared to other piezoelectric materials like PZT thick film. The design is analysed using COMSOL multi physics which is used for many MEMS operations and also problems related to physics with many mathematical calculations with better efficiency and ease to design. We designed a cantilever with PMN-PT properties which has good coupling coefficient and increased perforations in number in form of square and circular. We tested the displacement sensitivity i.e., the variation of displacement at different eigen frequencies with increase in number of perforations. We observe output voltage by designing electromechanical analysis and variation in output capacitance of  2 .41 x 10-22 Farads is observed.

  • References

    1. [1] G. Tang, J.-Q,Liu, B.Yang, J.-B,Luo, H.-S.Liu, Y,-G.Liu, C.-s. Yang, V.-D. Dao, K. Tanaka and S.Sugiyama, 'Piezoelectric MEMS low-level vibration energy harvester with PMN-PT single crystal cantilever' ,IEEE Journal, vol.48, 2012

      [2] Hua-Bin Fang, Jing-Quan Liu, Zheng-Yi Xu, Lu Dong,Li Wang,Di Chen,Bing-Chu Cai, Yue Liu.'Frabrication and performance of MEMS-based Piezoelectric power generator for Vibration energy harvesting', Microelctronics Journal 37,pp. 1280-1284,2006

      [3] B S Lee, S C Lin,W J Wu,X Y Wang, P Z Chang and C K Lee. 'Piezoelectric MEMS Generators fabricated with an aerosol deposition PZT thin film', J. Micromechanics, Microengineering.,19,pp.1-8,2009.

      [4] Ming-Pei Lu, Jinhui Song, Ming-Yen Lu, Min-Teng Chen, Yifan Gao, Lih-Juann Chen, and Zhong Lin Wang.’Piezoelectric Nanogenerator Using P-type ZnO Nanowire Arrays', Nano Letters,Vol.9,.1223-1227,2009.

      [5] M. Marzencki, Y.Ammar and S. Basrour.'Integrated Power Harvesting System Including a MEMS Generator And a Power Management Circuit', Sensor and Actuators A, 145-146,pp.363-370,2007.

      [6] CHENGLIANG SUN, LIFENG QIN, FANG LI AND QING-MING WANG'. Piezoelectric energy harvesting using single crystal Pb(Mg 1/3 Nb 2/3 )O-xPbTio 3(PMN_PT) device',J.intell.Mater. System Struct.,20,pp.559-568,2007.

      [7] Alex Mathers, Kee S. Moon, and Jingang Yi,.’A Vibration-Based PMN-PT Energy Harvester', IEEE Sensors.J.,9,pp.731-739,2009.

      [8] Niell G Elvin, Alex A Elvin and Myron Spector,'A Self-Powered Mechanical Strain Energy Sensor',department of orthopaedic surgery,pp. 293-299,2000.

      [9] Jin-Rong Cheng, Wenyi Zhu, Nan Li, and L. Eric Cross.’Electerical Properties of sol-gel- derived Pb(Zr0.52Ti0.48)O3 thin films on a PbTiO3-coated stainless steel substrate’,Appl.Phys.lett., Vol. 81,No. 25,2002.

      [10] Rajeevan Amirtharajah and Anantha P.Chandrakasan. ’Self-Powered Signal Processing Using Vibration-Based Power Generation’, IEEE Journal, vol.33,1998.

      [11] E.Lefeuvre,A.Badel, C Richard, L.Petit,D.Guyomar,’A Comparison between several Vibration-powered piezoelectric generators for standalone systems’.Sensors and Actuators A 126, 405-416,2005

      [12] Robert W. Reger, Peggy J. Clews, Gwendolyn M. Bryan, C. A. Keane, M.D.Henry, and B. A. Griffin, 'Aluminium nitride piezoelectric microphones as Zero-power passive acoustic filters', IEEE, 2017.

      [13] Salem Saadon, Yufridin Wahab, 'MEMS piezoelectric energy harvester for low frequency application', IEEE,ISSBES,2015

      [14] Y.B.Jeon,R.Sood, J.-h.Jeong,S.-G.Kim,’MEMS power generator with transverse mode thin film PZT’.Sensor and Actuators A 122,16-22 ,2005.

      [15] Hyun-Cheol Song, Prashanth Kumar, Deepam Maurya, Min-Gyu Kang, William T.Reynolds,'Ultra-Low resonant piezoelectric mems energy harvester with high power density', Journal of micro electromechanical systems,2017.

      [16] Dr. Seetaiah Kilaru, Hari Kishore K, Sravani T, Anvesh Chowdary L, Balaji T “Review and Analysis of Promising Technologies with Respect to fifth Generation Networksâ€, 2014 First International Conference on Networks & Soft Computing, ISSN:978-1-4799-3486-7/14,pp.270-273,August2014.

      [17] Meka Bharadwaj, Hari Kishore "Enhanced Launch-Off-Capture Testing Using BIST Designs†Journal of Engineering and Applied Sciences, ISSN No: 1816-949X, Vol No.12, Issue No.3, page: 636-643, April 2017.

      [18] N Bala Dastagiri, Kakarla Hari Kishore "Reduction of Kickback Noise in Latched Comparators for Cardiac IMDs†Indian Journal of Science and Technology, ISSN No: 0974-6846, Vol No.9, Issue No.43, Page: 1-6, November 2016.

      [19] A Murali, K Hari Kishore, D Venkat Reddy "Integrating FPGAs with Trigger Circuitry Core System Insertions for Observability in Debugging Process†Journal of Engineering and Applied Sciences, ISSN No: 1816-949X, Vol No.11, Issue No.12, page: 2643-2650, December 2016.

      [20] Mahesh Mudavath, K Hari Kishore "Design of CMOS RF Front-End of Low Noise Amplifier for LTE System Applications Integrating FPGAs†Asian Journal of Information Technology, ISSN No: 1682-3915, Vol No.15, Issue No.20, page: 4040-4047, December 2016.

      [21] P Bala Gopal, K Hari Kishore, B.Praveen Kittu “An FPGA Implementation of On Chip UART Testing with BIST Techniquesâ€, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 10, Number 14 , pp. 34047-34051, August 2015

      [22] S Nazeer Hussain, K Hari Kishore "Computational Optimization of Placement and Routing using Genetic Algorithm†Indian Journal of Science and Technology, ISSN No: 0974-6846, Vol No.9, Issue No.47, page: 1-4, December 2016.

      [23] N Bala Gopal, K Hari Kishore "Analysis of Low Power Low Kickback Noise in Dynamic Comparators in Pacemakers†Indian Journal of Science and Technology, ISSN No: 0974-6846, Vol No.9, Issue No.44, page: 1-4, November 2016.

      [24] T. Padmapriya and V. Saminadan, “Priority based fair resource allocation and Admission Control Technique for Multi-user Multi-class downlink Traffic in LTE-Advanced Networksâ€, International Journal of Advanced Research, vol.5, no.1, pp.1633-1641, January 2017.

      [25] S.V.Manikanthan and D.Sugandhi “ Interference Alignment Techniques For Mimo Multicell Based On Relay Interference Broadcast Channel †International Journal of Emerging Technology in Computer Science & Electronics (IJETCSE) ISSN: 0976-1353 Volume- 7 ,Issue 1 –MARCH 2014.

      [26] Rajesh, M., and J. M. Gnanasekar. "Path observation-based physical routing protocol for wireless ad hoc networks." International Journal of Wireless and Mobile Computing 11.3 (2016): 244-257.

  • Downloads

  • How to Cite

    Prasad, G., Siddaiah, N., Sanjeev, P., Raviteja, A., Karunya, P., & Priyanka, P. (2017). Design and analysis of energy harvester using MEMS based Cantilever with variable perforations. International Journal of Engineering & Technology, 7(1.5), 141-145. https://doi.org/10.14419/ijet.v7i1.5.9136

    Received date: 2018-01-11

    Accepted date: 2018-01-11

    Published date: 2017-12-31