Modeling, control, and implementation of the soft switching dc-dc converter for battery charging/discharging applications

  • Authors

    • J Barsana Banu
    • M Balasingh Moses
    2017-12-31
    https://doi.org/10.14419/ijet.v7i1.3.9667
  • Battery Charging/Discharging, Bidirectional Power Flow, Steady-State Analysis, Zero Current Switching (ZCS), Zero Voltage Switching (ZVS).

  • Abstract

    This paper presents a soft switching bidirectional buck-boost converter for battery charging and discharging systems. The proposed method comprises of Inductance Capacitance Diode combination of the bidirectional dc-dc converter with one more electric switch is presented to accomplish high efficiency, high conversion ratio and maximum output power compared to the other bidirectional converters. It works in both steps up and steps down conversions. The proposed converter has alleviated the switching stress problems in the conventional bidirectional dc-dc converter. It suppresses the switching losses by zero voltage and zeroes current turn ON and OFF all switches. The complete steady-state analysis of the proposed bi-directional converter has described with its operating modes. Design consideration of parameters also presented to realize the converter characteristics. The switching stress on the power semiconductor devices is given, and the comparisons between the proposed technique and other bidirectional converters are illustrated with some results. Finally, the experimental prototype of 20 kHz, 315 W output power converter developed, and its feasibility verified through computer simulation results.

  • References

    1. [1] Do HL (2013), Analysis and implementation of a high-efficiency zero-voltage-zero current switching dc–dc converter. International Journal of Circuit Theory and Applications, 41, 889–903.https://doi.org/10.1002/cta.827.

      [2] Choi BH, Lee ES, Kim JH & Rim CT (2015), DCM analysis of single-switch-based zvzcs converters with a tapped inductor. IEEE Transactions on Power Electronics, 30, 6617-6627.https://doi.org/10.1109/TPEL.2015.2393362.

      [3] Yang JW, & Do HK (2014), A soft-switching high step-up dc-dc converter with a single magnetic component. International Journal of Circuit Theory and Applications, 42, 620–631.https://doi.org/10.1002/cta.1876.

      [4] Liu HC, & Li F (2015), Novel high step-up dc–dc converter with an active coupled-inductor network for a sustainable energy system. IEEE Transactions on Power Electronics, 30, 6476-6482.https://doi.org/10.1109/TPEL.2015.2429651.

      [5] kazimierczuk M.K (2008), Pulse-width modulated dc–dc power converters. John Wiley & Sons, Ltd, 2008.

      [6] Samosir AS & Yatim AHM (2010), Dynamic evolution control for synchronous buck dc–dc converter: Theory, model and simulation. Simulation Modelling Practice and Theory, 18, 663–676.https://doi.org/10.1016/j.simpat.2010.01.010.

      [7] Lee JH, Yu D-H, Kim J-G, Kim Y-H, Shin S-C, Jung D-Y, Jung Y-C & Won C-Y (2013), Auxiliary Switch Control of a Bidirectional Soft-Switching DC/DC Converter, IEEE Transactions on Power Electronics. 28, 5446-5457.https://doi.org/10.1109/TPEL.2013.2254131.

      [8] Hwu KI & Jiang WZ (2016), Non-isolated large step-down voltage conversion ratio converter with non-pulsating output current. International Journal of Circuit Theory and Applications, 44, 1657-1684.https://doi.org/10.1002/cta.2185.

      [9] Bella TL, Yu W, Lai J-S (J). Senesky M, & Anderson D (2014), A bidirectional-switch-based wide-input range high-efficiency isolated resonant converter for photovoltaic applications. IEEE Transactions on Power Electronics. 29, 3473-3484.https://doi.org/10.1109/TPEL.2013.2282258.

      [10] Banu JB & Moses MB (2016), Soft-switching bidirectional buck boost converter with simple auxiliary circuit. Indian Journal of Science and Technology, 9, 1-10.

      [11] Xuewei P & Rathore AK (2013), Novel interleaved bidirectional snubberless soft-switching current-fed full-bridge voltage doubler for fuel-cell vehicles. IEEE Transactions on Power Electronics, 28, 5535-5546.https://doi.org/10.1109/TPEL.2013.2252199.

      [12] Yao C, Ruan X, Wang X &Tse CK (2011), Isolated buck–boost dc/dc converters suitable for wide input-voltage range. IEEE Transactions on Power Electronics, 26, 2599-2613.https://doi.org/10.1109/TPEL.2011.2112672.

      [13] Lin C-C, Yang L-S, & Wu GW (2013), Study of a non-isolated bidirectional dc–dc converter. IET Power Electronics. 6, 30–37.https://doi.org/10.1049/iet-pel.2012.0338.

      [14] Bhajana VVK, &Drabek P (2015), A new non-isolated zcs bidirectional buck–boost dc–dc converter for energy storage applications in electric vehicles. Arabian Journal of Science and Engineering, 40, 3595–3605.https://doi.org/10.1007/s13369-015-1840-5.

      [15] Chiu H-J, Lo Y-K, Kuo S-W, Cheng S-J & Lin F-T (2014), Design and implementation of a high-efficiency bidirectional dc-dc converter for dc micro-grid system applications. International Journal of Circuit Theory and Applications, 42, 1139–1153.https://doi.org/10.1002/cta.1910.

      [16] Lee J-H, Yu D-H, Kim J-G, Kim, Y-H, Shin S-C, Jung D-Y, Jung Y-C, & Won C-Y (2013), Auxiliary switch control of a bidirectional soft-switching dc/dc converter.IEEE Transactions on Power Electronics, 28, 5446-5457.https://doi.org/10.1109/TPEL.2013.2254131.

      [17] Ling R, Zhao G & Huang Q (2015), High step-up interleaved boost converter with low switch voltage stress. Electric Power Systems Research, 128, 11–18.https://doi.org/10.1016/j.epsr.2015.06.016.

      [18] Lin BR & Chao CH (2013), Analysis and implementation of an interleaved zvs converter with high input voltage. International Journal of Circuit Theory and Applications. 41, 924–945.https://doi.org/10.1002/cta.830.

      [19] Samavatian V &Radan A (2015), A high efficiency input/output magnetically coupled interleaved buck–boost converter with low internal oscillation for fuel-cell applications: Small signal modeling and dynamic analysis. Electrical Power and Energy Systems, 67, 261–271.https://doi.org/10.1016/j.ijepes.2014.11.011.

      [20] Aroudi AE, Mandal K, Giaouris D, Banerjee S, Abusorrah A, Hindawi MA, & Al-Turki Y (2015), Fast-scale stability limits of a two-stage boost power converter. International Journal of Circuit Theory and Applications, 44, 1127-1141.https://doi.org/10.1002/cta.2153.

      [21] Liu C, Zhu D, Zhang J, Liu H & Cai G (2015), A bidirectional dual buck-boost voltage balancer with direct coupling based on a burst-mode control scheme for low-voltage bipolar-type dc microgrids. Journal of Power Electronics, 15, 1609-1618.https://doi.org/10.6113/JPE.2015.15.6.1609.

      [22] Chang Y-H & Wu K-W (2014), A gain/efficiency-enhanced bidirectional switched capacitor dc-dc converter. International Journal of Circuit Theory and Applications. 42, 468–493.https://doi.org/10.1002/cta.1863.

      [23] Mahery HM &Babaei E (2013), Mathematical modeling of buck–boost dc–dc converter and investigation of converter elements on transient and steady state responses. Electrical Power and Energy Systems, 44, 949–963.https://doi.org/10.1016/j.ijepes.2012.08.035.

      [24] Tan RHG, Hoo LYH (2015), DC-DC converter modeling and simulation using state space approach. 2015 IEEE conference on Energy Conversion (CENCON), Johor Bohru, 42-47.https://doi.org/10.1016/j.rcim.2009.11.007.

      [25] Shiau J-K & Cheng C-J (2010), Design of a non-inverting synchronous buck-boost dc/dc power converter with moderate power level. Robotics and Computer-Integrated Manufacturing. 26, 263–267.

      [26] Jung D-Y, Hwang S-H, Ji Y-H, Lee J-H, Jung Y-C & Won C-Y (2013), Soft-switching bidirectional dc/dc converter with a lc series resonant circuit. IEEE Transactions on Power Electronics, 28, 1680-1690.https://doi.org/10.1109/TPEL.2012.2208765.

      [27] Ismail EH, Fardoun AA &Zerai AA (2014), Step-up/step-down dc-dc converter with near zero input/output current ripples. International Journal of Circuit Theory and Applications, 42, 358–375.https://doi.org/10.1002/cta.1856.

      [28] Banu JB, Moses M.B &Rajarajacholan S (2016), A non isolated bidirectional dc-dc converter with lcd snubber. RevistaTecnica De La Facultad De Ingenieria Universidad Del Zulia, 39(1), 131-143.

      [29] Pavlovsky M, Guidi G & Kawamura A (2014), Buck/Boost dc–dc converter topology with soft switching in the whole operating region. IEEE Transactions on Power Electronics. 29, 851-862.https://doi.org/10.1109/TPEL.2013.2258358.

  • Downloads

  • How to Cite

    Barsana Banu, J., & Balasingh Moses, M. (2017). Modeling, control, and implementation of the soft switching dc-dc converter for battery charging/discharging applications. International Journal of Engineering & Technology, 7(1.3), 104-111. https://doi.org/10.14419/ijet.v7i1.3.9667

    Received date: 2018-02-22

    Accepted date: 2018-02-22

    Published date: 2017-12-31