UPFC based transmission line power load flow control under different operating methods

  • Authors

    • K Lingaswamy
    • T Anil Kumar
    • G Hari Krishna
    • N Shiva Prasad
    2017-12-21
    https://doi.org/10.14419/ijet.v7i1.1.9850
  • Unified Power Flow Controllers (UPFC), Power Flow Control, Operating Modes, Sssc, Statcom

  • Abstract

    In this paper the methods to control operation of shunt and series inverters using power flow controller (UPFC) is analyzed with real power flow in power system transmission line. These operation mode using UPFC are executed to reduce Swaying in the control framework transport. The execution about every system may be resolved toward the predefined administrative control. Those arrangement What's more shunt converter working under four separate blending from claiming working modes may be used to ponder An example force framework organize. The line flow in MW oscillation damping is predicated with various modes of operations and verified same with MATLAB/ SIMULINK.

  • References

    1. [1] Hingorani N.G. and L.Gyugui, “Understanding FACTSâ€, IEEE Press, New York 2000.

      [2] E. Gholipour, S.Saasate, “Improving of Transient Stability of Power Systems Using UPFCâ€, IEEE Trans. On Power Delivery, vol. 20, No.2, pp. 1677-1682, 2005. https://doi.org/10.1109/TPWRD.2005.846354.

      [3] S.Tara Kalyani, G. Tulasiram Das, “Simulation of D-Q Control System for a Unified Power Flow Controllerâ€, ARPN Journal of Engineering and Applied Sciences, Vol. 2, No. 6, December 2007

      [4] Liming Liu, Pengcheng Zhu, Yong Kang, Jian Chen, “Power- Flow Control Performance Analysis of a Unified Power-Flow Controller in a Novel Control Schemeâ€, IEEE Transactions onPower Delivery, Vol. 22, No. 3, July 2007.

      [5] Zhengyu Huang, Yixin Ni, C. M. Shen, Felix F.Wu, Shousun Chen, and Baolin Zhang “Application of Unified Power Flow Controller in Interconnected Power Systems—Modeling,Interface, Control Strategy, and Case Studyâ€IEEE Transactions on Power Systems, Vol. 15,No. 2, May 2000.

      [6] Yasuo Morioka, Masanao Kato, Yasuhiro Mishima, YoshikiNakachi, “Implementation of Unified Power Flow Controller and Verification for Transmission Capability Improvement†IEEE Transactions on Power Systems, Vol. 14, No.2, May 1999. https://doi.org/10.1109/59.761883.

      [7] X.-P. Zhang, “Comprehensive modelling of the unified power flow controller for power system controlâ€, Springer-Verlag 2005.

      [8] Xiao-Ping Zhang, Keith R. Godfrey, “Advanced Unified Power Flow Controller for Power System Steady State Controlâ€, IEEE Conference on Electric Utility Deregulation, Restructuring and Power Technologies,2004 Vol.1,pp.228-233..

      [9] M. Noroozian, L. Ängquist, M. Ghandhari, and G. Andersson, “Use of UPFC for optimal power flow controlâ€, IEEE Trans. Power Delivery, vol. 17, no. 4, October 1997, pp. 1629-1634. https://doi.org/10.1109/61.634183.

      [10] G. Andersson, “Improving power systems dynamics by series-connected FACTS devices,†IEEE Trans. Power Delivery, vol. 12, no. 4, October 1997, pp. 1636-1642

      [11] GyugiL.â€Reactive Power Generation and Control by Thyrisror Circuitsâ€. IEEE trans. Ind. Appl., vol.15, No. 5. Pp.521-532. Sept/Oct.1919.

      [12] Noroozian M. and Andersson G. “Power Flow Control by Use of Controllable Series Componentsâ€. IEEE Tram on Power Delivery. vol. 8, No. 3, pp. 1420-1429, July 1993. https://doi.org/10.1109/61.252669.

      [13] C.-T. Chang and Y.-Y. Hsu, “Design of UPFC controllers and supplementary damping controller for power transmission control and stability enhancement of a longitudinal power systemâ€, IEE Proc. - Generation, Transmission, Distribution Vol.149. No. 4, July 2002, https://doi.org/10.1049/ip-gtd:20020199.

      [14] L. Gyugi, C. D. Schauder, S. L. Williams, T. R. Rietman, D.R. Torgerson, A.Edris, “The Unified Power Flow Controller: A New Approach To Power Transmission Control†,IEEE Transactions on Power Delivery, Vol.10, No.2, April 195

      [15] Farmer, DB; Gordon, RG (2006). "Atomic layer deposition on suspended single-walled carbon nanotubes via gas-phase noncovalent functionalization". Nano letters. 6 (4): 699–703. https://doi.org/10.1021/nl052453d.

      [16] Cao, J; Wang, Q; Dai, H (2005). "Electron transport in very clean, as-grown suspended carbon nanotubes". Nature Materials. 4 (10): 745–9. https://doi.org/10.1038/nmat1478.

      [17] Sangwan, V. K.; Ballarotto, V. W.; Fuhrer, M. S.; Williams, E. D. (2008). "Facile fabrication of suspended as-grown carbon nanotube devices". Applied Physics Letters. 93 (11): 113112. https://doi.org/10.1063/1.2987457.

      [18] .Lin, Yu-Ming; Tsang, James C; Freitag, Marcus; Avouris, Phaedon (2007). "Impact of oxide substrate on electrical and optical properties of carbon nanotube devices" (PDF). Nanotechnology. 18 (29): 295202. https://doi.org/10.1088/0957-4484/18/29/295202.

      [19] Javey, Ali; Guo, Jing; Wang, Qian; Lundstrom, Mark; Dai, Hongjie (2003). "Ballistic carbon nanotube field-effect transistors" (PDF). Nature. 424 (6949): 654–7 https://doi.org/10.1038/nature01797.

      [20] Avouris, Phaedon; Chen, Zhihong; Perebeinos, Vasili (2007). "Carbon-based electronics". Nature Nanotechnology. 2 (10): 605–15. https://doi.org/10.1038/nnano.2007.300.

      [21] P. Avouris et al, "Electronics and Optoelectronics with Carbon Nanotubes," Archived October 8, 2010, at the Wayback Machine. American Institute of Physics, 18–21, June/July 2004.

  • Downloads

  • How to Cite

    Lingaswamy, K., Anil Kumar, T., Hari Krishna, G., & Shiva Prasad, N. (2017). UPFC based transmission line power load flow control under different operating methods. International Journal of Engineering & Technology, 7(1.1), 346-349. https://doi.org/10.14419/ijet.v7i1.1.9850

    Received date: 2018-03-04

    Accepted date: 2018-03-04

    Published date: 2017-12-21