Vol 3, No 3 (2014)

Table of Contents


Legal and contractual foundations of intellectual property of design of construction projects

Hossein Behsan, Vahid Shahhosseini Pages: 290-297

DOI: 10.14419/ijet.v3i3.2689

PLC-controlled stepper motor drive for NC positioning system

Hussein Sarhan Pages: 298-307

DOI: 10.14419/ijet.v3i3.2796

Performance analysis of landsat5 remote sensing data compression technique used for land use and land cover mapping

Kousalyadevi Rajamanickam, J. Suganthi Pages: 308-314

DOI: 10.14419/ijet.v3i3.2788

Scalability in Ad Hoc Networks:The Effects of its Complex Nature

Juan Lopez, Jorge Trivino Pages: 315-321

DOI: 10.14419/ijet.v3i3.2828

Experimental investigation of enhanced remediation of contaminated soil using ultrasound effect

Adegbola Adeyinka, A.A. Dare, D.S. Popoola, H.A. Saka, A.O. Afolabi Pages: 322-326

DOI: 10.14419/ijet.v3i3.1103

One-year renal graft survival prediction using a weighted decision tree classifier

Dalia Atallah, Ali Eldesoky, Amira H., Mohamed Ghoneim Pages: 327-332

DOI: 10.14419/ijet.v3i3.2334

The most appropriate mixing method of polypropylene fiber with aggregates and bitumen based on binder mix design

Mohsen Zahedi, Ramin Bayat, Mehdi Nazemi Jalal Pages: 333-336

DOI: 10.14419/ijet.v3i3.2959

Service oriented architecture and privacy preserving mashup of healthcare data

R. Vijayalakshmi, N. Duraipandian Pages: 337-342

DOI: 10.14419/ijet.v3i3.2139

Influence of form deviations on the tolerance analysis

Mouhssine Chahbouni, said Boutahari, Driss Amegouz Pages: 343-349

DOI: 10.14419/ijet.v3i3.2969

Design and implementation of a three axis digitally controlled traverse system for flow surveys in a drying chamber

Achilleas Bardakas, Vasilis Chasiotis, Dimitrios Tzempelikos, Andronikos Filios Pages: 350-356

DOI: 10.14419/ijet.v3i3.3044

Simulation of the flow inside an annular can combustor

Wael Kadhim, Dhirgham Alkhafagiy, Andrew Shires Pages: 357-364

DOI: 10.14419/ijet.v3i3.2499

Harmonic aggregation techniques for power quality assessment a standard framework

Mohammad Mahdy Share Pasand, Zahra Rahmatian Pages: 365-371

DOI: 10.14419/ijet.v3i3.3118

Analysis of elastic buckling behavior of steel delta girders

Mohammadali Jafari Sahnehsaraei, Saeed Erfani Pages: 372-377

DOI: 10.14419/ijet.v3i3.3059

An application phase-modular rectifier applied to MMC with medium voltage based on wind turbine generator

Narin Watanakul Pages: 378-386

DOI: 10.14419/ijet.v3i3.2996

Investigation of jatropha seed oil as austempering quenchant for ductile cast iron

Akor Terngu, Gundu David Terfa Pages: 387-390

DOI: 10.14419/ijet.v3i3.1391

An analysis of issues in biometric finger identification

Nanda Kumar Veerasamy Pages: 391-395

DOI: 10.14419/ijet.v3i3.2368

A replacement of chromate coating for adhesive bonding of stainless steel in a corrosive environment

Khaled Alawadhi, Richard Brown, Jalal Alsarraf Pages: 396-408

DOI: 10.14419/ijet.v3i3.3041

Decision making for stable inspection planning of deteriorating structures based on constraint reliability and uncertainties

Jalal alsarraf, S.A.M. Swilem, khaled alawadhi Pages: 409-425

DOI: 10.14419/ijet.v3i3.3042

Copyright © 2022 Science Publishing Corporation Inc. All rights reserved.