Vol. 7 No. 4.26 (2018): Special Issue 26

ICBME 2018

Published: 2018-11-30

Articles

Correlation of Biomechanical Properties and Grayscale of Articular Cartilage using Low-Field Magnetic Resonance Imaging
Yew Wansin, Mohd Juzaila Abd Latif Yew, Sharifah Majedah Idrus Alhabshi, amaluddin Mahmud, Mohammed Rafiq Abdul Kadri

https://doi.org/10.14419/ijet.v7i4.26.22128

1-5
Knee and Hip Extension Responses to Prolonged Simulated Soccer Match-Play: a 2D Study
Muhammad Hamdan, Siti Norfariza Mohd Noha, Hosni Hasan, Hashbullah Ismail, Raja Mohammed Firhad Raja Azidin

https://doi.org/10.14419/ijet.v7i4.26.22129

6-14
The Effect of Magnetic Induction Spectroscopy Signal for Cylindrical Screw with Different Length
M. Amran, R. Daud, Z. Zakaria, M. M.K. Ali Hassan, M. I. Omar, F. Mat

https://doi.org/10.14419/ijet.v7i4.26.22130

15-19
Simplified Femoral Bone Model for Numerical Analysis of Proximal Femur
M. H. Khan, R. Daud, M. K. Ali Hassan, A. F.Azizan

https://doi.org/10.14419/ijet.v7i4.26.22131

20-24
Blood Flow Modelling to Improve Cardiovascular Diagnostics: a Preliminary Review of 1-D Modelling
A. Butt, Y. A. Abakr, K. B. Mustapha

https://doi.org/10.14419/ijet.v7i4.26.22132

25-34
Oriented Strand Board using Smaller Strand Size as a Core Layer
Nor Yuziah M.Y, Nazri W.M, Jamal K, Rahim S

https://doi.org/10.14419/ijet.v7i4.26.22133

35-39
Comparative Study on Bending Strength of Metallic Bone Staple
Nur Hidayatul Nadhirah Elmi Azham Shah, Muhammad Afiq Hanizar, Muhammad Hussain Ismail

https://doi.org/10.14419/ijet.v7i4.26.22134

40-44
Quantifying and Comparing the Hyperelastic Properties of Skin, Leather and Silicone
Zurri Adam Mohd Adnan, Mohd Azman Yahaya, Mohd Nor Fazli Adull Manan, Jamaluddin Mahmud

https://doi.org/10.14419/ijet.v7i4.26.22135

45-49
The Effectiveness of Different Insole Material in Plantar Pressure Reduction : a Pilot Study
Solehuddin Shuib, Anis Salwa Ahmad, Abdul Rahman Omar, Muhammad Faiz Borhanuddin, Shahfuan Hanif Ahmad Hamidi

https://doi.org/10.14419/ijet.v7i4.26.22136

50-53
Evaluation of the Performance of Natural Fiber Reinforced Polymer Composites
Muhammad Surahman Ramli, Anizah Kalam, Fauziah Md. Yusof, Ibrahim Yuni

https://doi.org/10.14419/ijet.v7i4.26.22137

54-59
Tissue Differentiation by Refractive Index using Fiber Optic Displacement Sensor
Rania Al-Ashwal, Amirul Ridhwan Sazali, Alex Lo Zhen Kai, Amir Mustakim Ab Rashid, Mohamad Hafiz Mohamad Afandi, Muhammad Syafiq Mohd Najib, Nurul Afiqah Fadzil, Syakirah Mohamed Amin

https://doi.org/10.14419/ijet.v7i4.26.22138

60-62
Development and Evaluation of a Spot Sensor Glove for the Tactile Prosthetic Hand
Mohammed Najeh Nemah, Cheng Yee Low, Pauline Ong, Noor Ayuni Che Zakaria

https://doi.org/10.14419/ijet.v7i4.26.22139

63-69
Mechanics of Total Ankle Replacement During Flexion in Relation to Geometrical Design: a Finite Element Study
Muhammad Ajmal Mohd Taqayuddin, Mohd Afzan Mohd Anuar, Solehuddin Shuib, Zulkifli Mohamed, Anwar P.P. Abdul Majed

https://doi.org/10.14419/ijet.v7i4.26.22140

70-72
An Alternative Wavelength Range for Noninvasive Assessment of Wound Tissue Oxygenation Status
Sheena P. Philimon, Audrey K. C. Huong, Xavier T. I. Ngu

https://doi.org/10.14419/ijet.v7i4.26.22141

73-77
Design and Development Approach of Smart Glove for Post Stroke Rehabilitation
Nurhazlinda Fariha Mohd Nawi, Audrey Huong Kah Ching, Nabilah Ibrahim, Wan Nur Hafsha Wan Kairuddin, Nur Anida Jumadi, Raja Mohd Aizat Raja Izaham, Gan Hong-Seng, Wan Mahani Hafizah Wan Mahmud

https://doi.org/10.14419/ijet.v7i4.26.22142

78-82
Computational Analysis of Adjustable Ankle Foot Orthosis for Cerebral Palsy Children
Eka Noorul Amanina Darwin, Giha Tardan, Abdul Halim Abdullah

https://doi.org/10.14419/ijet.v7i4.26.22143

83-88
Nanoscale Zinc Hydroxyapatite (ZnHA) Particles for Bone Tissue Engineering
Noorainol Faiz Noor Haris, Mardziah Che Murad, Nik Rozlin Nik Masdek

https://doi.org/10.14419/ijet.v7i4.26.22144

89-92
Influence of Resin Content and Particle Size on Particleboard from Leucaena Leucocephala
Nor Yuziah Mohd Yunus, Jamaludin Kasim, Zulhilmi Razali, Wan Mohd Nazri Wan Abdul Rahman

https://doi.org/10.14419/ijet.v7i4.26.22145

93-96
The Characteristic of Cobalt-Nickel-Iron Alloy Coating Coated on Aluminium, Brass and Stainless Steel
Nik Rozlin N.M Masdek, Zuraidah Salleh, Md Zin Abu, . .

https://doi.org/10.14419/ijet.v7i4.26.22146

97-101
Tactile Sensing Fingers Device Using Quantum Tunneling Composite (QTC) Pills
Ahsana Aqilah Ahmad, Nur Izzah Lina Azman, Muhammad Azmi Ayub

https://doi.org/10.14419/ijet.v7i4.26.22147

102-107
Design of Thumb Exoskeleton Rehabilitation Device
Abdul Rahman Mohamed Affandi, Shahrul Azam Abdullah, . .

https://doi.org/10.14419/ijet.v7i4.26.22148

108-111
The Development of Lower Limb Exoskeleton for Stroke Patients
H. M. Desa, M. I. Ideris, R. Jailan, N. M. Tahir

https://doi.org/10.14419/ijet.v7i4.26.22149

112-118
Computational Analysis on Skull Fractures and Brain Injury using Finite Element Analysis
Mohd Hazwan Mohamed Norli, Mohammad Al Faiz Hilmi Mohd Al Zahari, Shahrul Hisyam Marwan, Abdul Halim Abdullah

https://doi.org/10.14419/ijet.v7i4.26.22150

119-122
Effects of Screw and Plate Positions in the Dual Plating of Distal Humerus Fixation
Luqman Hakim Noordin, Shahrul Hisyam Marwan, Abdul Halim Abdullah

https://doi.org/10.14419/ijet.v7i4.26.22151

123-127
Rheological Behaviour of Nickel -Titanium Powder Mixture Feedstock Prepared by Dual Assymetric Centrifuge (DAC) Speed Mixer
Mashitah Masoâ€™od, Asif Khushaini, Rohana Ahmad, Nor â€˜Aini Wahab4,, Muhammad Hussain Ismail

https://doi.org/10.14419/ijet.v7i4.26.22152

128-131
A Review on Vibration Analysis of Seismocardiography (SCG)
Ng. Seng Hooi, Kamarulafizam Bin Ismail, M. Mailah, Md. Rizman

https://doi.org/10.14419/ijet.v7i4.26.22153

132-135
Profile of Blood Glucose and Insulin after Vitamin C and Vitamin E Supplementation on Active Teenagers
Irfiansyah Irwadi, Hayuris Kinandita, Jamaluddin Mahmud, Lilik Herawati

https://doi.org/10.14419/ijet.v7i4.26.22154

136-140
Design and Simulation of MEMS Moisture Sensor Using COMSOL Multiphysics Software
Muhamad Nazrin Ismail, Noriah Yusoff, Nor Hayati Saad, Amirul Abd Rashid

https://doi.org/10.14419/ijet.v7i4.26.22155

141-145
Blood Flow Modeling to Improve Cardiovascular Diagnostics: Application of A GTF to Predict Central Aortic Pressure using a 1-D Model
A. T. Butt, Y. A. Abakr, K. B. Mustapha

https://doi.org/10.14419/ijet.v7i4.26.22156

146-152
Theoretical Bending Collapse of Hat-Section Tubes
Hafizan Hashim, Hanita Hashim, Arif Affendi Jamal, M. A.M. Jusoh

https://doi.org/10.14419/ijet.v7i4.26.22157

153-158
Experimental Investigations on the Performance of a Single Slope Solar Still Coupled with Shallow Solar Pond under Malaysian Conditions
Kamarulbaharin Z. A., Safie M.A, Azmi A.M, Singh B.S.B

https://doi.org/10.14419/ijet.v7i4.26.22158

159-162
Numerical Analysis of SiO2 Nanofluid Performance in Serpentine PEMFC Cooling Plate
Irnie Azlin Zakaria, Wan Ahmad Najmi Wan Mohamed, Wan Azmi Wan Hamzah

https://doi.org/10.14419/ijet.v7i4.26.22159

170-174
Modeling Analysis of Guided Ultrasonic Waves in Composite Plates with Impact Damage
Noorfaten Asyikin Ibrahim, Bibi Intan Suraya Murat

https://doi.org/10.14419/ijet.v7i4.26.22162

175-19
Dynamic Stress Analysis of Skin (Bovine) and Synthetic Skin (Silicone) under Low Impact Loading : a Review and Framework
Zurri Adam Mohd Adnan, Jamaluddin Mahmud, Mohd Azman Yahaya

https://doi.org/10.14419/ijet.v7i4.26.22163

180-184
The Synthesis of Agar Silicone Biocomposite and Its Mechanical Properties
Nurul Nadiah Azmi, Jamaluddin Mahmud, Mohd Juzaila Abd Latif

https://doi.org/10.14419/ijet.v7i4.26.22164

185-189
Effect of Ring Material and Diameter on Orthopedic Implant Stability: External Fixation in Femur Bone
Nur Fatin Izzati Ibrahim, Ruslizam Daud, Muhammad Khairul Ali Hassan, Noor Ali Hassan, Noor Alia Md Zain, Nur Saifullah Kamaruddin, Asrul Fahmi Azizan, Yazid Bajuri

https://doi.org/10.14419/ijet.v7i4.26.22165

190-193
Screw-Bone Implant Loosening: Complication, Cause and Assessment
M. A Ghani, M. K. Ali Hassan, R. Daud

https://doi.org/10.14419/ijet.v7i4.26.22166

194-198
Stress Cracking Behavior of Interstitial Matrix and Cement Line Interface Deflection
Raja Nor Syazwani Izzati Raja Ali, Ruslizam Daud, Muhammad Khairul Ali Hassan, Noor Alia Md Zain, Nurul Najwa Mansor

https://doi.org/10.14419/ijet.v7i4.26.22167

199-204
Characterisation of Skin Biomechanical Properties via Experiment-Numerical Integration
Nor Fazli Adull Manan, Linasuriani Muhamad, Zurri Adam Mohd Adnan, Mohd Azman Yahaya, Jamaluddin Mahmud

https://doi.org/10.14419/ijet.v7i4.26.22168

205-208
Mechanical and Physical Properties of Kelempayan (Neolamarckia Cadamba) Particleboard
Nazri W.M, Nur Sakinah M.T, Jamalu K

https://doi.org/10.14419/ijet.v7i4.26.22169

209-214
Multiple Angle of Bisector Rinn Holder for Oral X-Ray
Nik Amirul Khalid Bin Nik Dziauddin, Nor Fazli Adull Manan, Mohd Yusmialdil Putera Mohd Yusof, Jamaluddin Mahmud, Shahrul Azam Abdullah

https://doi.org/10.14419/ijet.v7i4.26.22170

215-220
Electrodeposition of Co-Ni-Fe on Stainless Steel Bolts
M. S. Md.Nor, Z. Salleh, N. R. N. M. Masdek, Y. M Taib, M. Z. Abu

https://doi.org/10.14419/ijet.v7i4.26.22171

221-225
Innovation of New System of Water Supply for Wudhu
C. F Mat Taib, S. S Iqubal, Fauziah Md Yusof, S. Kasolang

https://doi.org/10.14419/ijet.v7i4.26.22172

226-229
Finite Element Analysis of Uncemented Total Hip Replacement: the Effect of Bone-Implant Interface
Nur Faiqa Ismail, Solehuddin Shuib, Muhd Azman Yahaya, Ahmad Zafir Romli, Amran Ahmed Shokri

https://doi.org/10.14419/ijet.v7i4.26.22173

230-234
Failure Analysis of Woven Kevlar/Epoxy under Uniaxial Tension
Norzihan Rahimi, Ahmad Kamil Hussain, Mohd Sultan Ibrahim Shaik Dawood, Adib Zulfadhli Mohd Alias, Muhamed Hafiy Afiq Md Yusoff, Jamaluddin Mahmud

https://doi.org/10.14419/ijet.v7i4.26.22174

235-239
Development of a Quantitative Assessment System for Upper Limb Motor Disorder in Occupational Therapy
Mohd Nor Azmi Ab Patar, Hokyoo Lee, Jamaluddin Mahmud, Azim Patar

https://doi.org/10.14419/ijet.v7i4.26.22175

240-244
Quantifying Tensile Properties of Bamboo Silicone Biocomposite using Yeoh Model
Kamarul Nizam Hassan, Jamaluddin Mahmud, Anwar P.P. Abdul Majeed, Mohd Azman Yahya

https://doi.org/10.14419/ijet.v7i4.26.22176

245-250
Rheological Behavior of Zirconia Added Alumina Mixture
Siti Norazlini Abd Aziz, Wan Saiful Sarhan Wan Saidi, Mimi Azlina Abu Bakar, Muhammad Hussain Ismail

https://doi.org/10.14419/ijet.v7i4.26.22177

251-256
Biomorphic Silicon Carbide from Malaysian Hardwood
Noor Leha Abdul Rahman, Koay Mei Hyie, Anizah Kalam, Fauziah Md Yusof

https://doi.org/10.14419/ijet.v7i4.26.22178

257-261
Transformations of the Right to Health Care Content, and its Connection with the Right to Biotechnology
Alsu M. Khurmatullina, Rimma R. Amirova

https://doi.org/10.14419/ijet.v7i4.26.27934

267-269
Structural Decomposition as the Method of Industry Priority Monitoring for Regional Development
Marat R. Safiullin, Azat R. Safiullin, Guzel Z. Mukhametova

https://doi.org/10.14419/ijet.v7i4.26.27935

270-273
Statistical Method for Tracing Hydraulic Fracture Front Without Evaluation of the Normal
A. D. Stepanov

https://doi.org/10.14419/ijet.v7i4.26.27936

274-278
Numerical Models for Hydraulic Refracturing on Vertical Oil Wells
Vladimir Bratov

https://doi.org/10.14419/ijet.v7i4.26.27937

279-284
Supply Chain Performance Influencer in Construction Domain: A Key Factor Analysis
Vivek Kumar, Y. V. RAO, Vikash Kumar

https://doi.org/10.14419/ijet.v7i4.26.27938

285-287
Branch and Bound Method to Resolve Non-Convex Quadratic Problems Over a Boxed Set
Boutheina Gasmi, Rachid Benacer

https://doi.org/10.14419/ijet.v7i4.26.27939

288-296
Stocks Allocation in Portfolio Selection using Fuzzy Soft Set
Shraddha Harode, Manoj Jha, Sujoy Das, Namita Srivastava

https://doi.org/10.14419/ijet.v7i4.26.27940

297-304
Factors Affecting Construction Dispute: Testimonies from Indian Construction Projects
Asra Fatima, Bellam Sivarama Krishna Prasad, T. SeshadriSekhar

https://doi.org/10.14419/ijet.v7i4.26.27941

305-310
Women Breaking the Barrier in Technology Startups Through an Innovative Business Model: A Case Study of Sree Technologies
Suman Naredla, D Ramesh Babu

https://doi.org/10.14419/ijet.v7i4.26.27942

311-313
Low Cost Monitoring System of Ground Reaction Force during Normal Gait Cycle for Motion Control and Analysis of Active Ankle Foot Orthosis
Mohd Nor Azmi Ab Patar, Hokyoo Lee, Azim Patar, Muhammad Azmi Ayub, Aminuddin Hamid

https://doi.org/10.14419/ijet.v7i4.26.28568

318-321
The Effect of Slurry Erosion Wear on Boronized Ductile Iron
Bulan Abdullah, Khalissah Yusof, Abu Zarr Ahmad Bakhtiar, Nor Hayati Saad

https://doi.org/10.14419/ijet.v7i4.26.28569

322-325
Simple Progression Law in Predicting the Damage Onset and Propagation in Composite Notched Laminates
Mohd Suhairil Meon, Narasimha Rao Mekala, Kai-Uwe S Schroeder

https://doi.org/10.14419/ijet.v7i4.26.22161

163-169